8052-IN 1000V Analog Insulation Tester

Analog Insulation Tester with high quality Taut Band movement.
Three insulation test voltages (DC): 250V, 500V, 1000V.
Two continuity test on “low ohms”: 3Ω & 500Ω.
High quality Taut Band movement.
Three insulation test voltages(DC): 250V, 500V, 1000V.
Two continuity test on “low ohms”:3Ω & 500Ω.
AC voltmeter with linear scale up to 600 Vac.
200mA short circuit current for continuity.
1mA test current on insulation test at nominal voltage.
Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.
Live warning and display of external voltage presence.
Fuse, air gap, crowbar and overload protected.
On line battery monitoring shows if battery is ok.
Manual zero ohm adjustment.
Low battery consumption.
Mirror scale.
Push and turn locking switch for continuous and hand free testing.
Supplied with high quality test leads.
BS 16 edition.


Insulation Resistance
Test voltage (DC V): 250V / 500V / 1000V
Measuring ranges: 0-100MΩ / 0-200MΩ / 0-400MΩ
Mid-scale value: 1MO / 2MO / 4MO
Scale multiplier: ×1/2 / ×1 / ×2
Accuracy: ± 5% of full scale
Output voltage open circuit: Rated test voltage +10%
Output short-circuit current: ≥ 1.0mA
Measuring ranges: 3Ω / 50Ω
zero Ω adjustment by knob
Output short-circuit current: ≥ 200 mA
Accuracy: ± 1.5% of scale length
AC/DC Voltage
Measuring ranges: 0-600V AC
Accuracy: ± 3% of scale length
Warning light circuit live lit From 90Vdc / 70Vac, Buzzer beep from 24V ac/dc
Dimensions: 221(L) × 110(W) × 56.8(D)mm
Weight (battery included): Approx. 600g
Power source: 1.5V (AA) × 6
Safety standard: EN 61010-1 CAT III 600V, EN 61326-1
Accessories: Instruction manual, Test leads, Batteries, Carry case, Hand strap